Home > Products > 40G QSFP+ >40G QSFP+ AOC


The 40G QSFP+ active optic cables are high performance, cost effective modules supporting data rate of 40Gbps and 100m transmission distance with MMF: can reach to100m on OM3 Multimode Fiber (MMF) .The transceiver part consists of three sections: 4 channels 850nm VCSEL array, 4 channels PIN photo detector array and MCU control unit.
Low power consumption, long reach interconnect solution supporting 11.3G/10G/8G/4G/2G fiber channel, PCIe and SAS. It is compliant with the QSFP+ MSA and IEEE P802.3ba.OCRECOM’s QSFP+ AOC is an assembly of 4 full-duplex lanes, where each lane is capable of transmitting data at rates up to 11.3Gb/s, providing an aggregated rate of 45.2Gb/s. OCRECOM’s QSFP+AOC is one kind of parallel transceiver which provides increased port density and total system cost savings.
  • Features
  • Application
  • Model Ordering Information

    u  4 channels full-duplex active optical cable

    u  10.3125Gb/s data rate per channel

    u  4 channels 850nm VCSEL array

    u  4 channels PIN photo detector array

    u  Low power consumption<1.5W

    u  Hot Pluggable QSFP+ form factor

    u  Maximum link length of 100m on OM3 Multimode Fiber (MMF)

    u  Compatible with RoHS

    u  Single +3.3V power supply

    u  Operating case temperature: 0 to +70°C

    u  10G/40GBASE Ethernet

    u  Switch, router and HBAs

    u  Infiniband transmission at 4 channels SDR, DDR and QDR

    u  High-performance Backplane Applications

    u  Proprietary Protocol Applications

    u  Data center

    u  Other links




    40G   QSFP+ AOC xxm

    Remark: 01=1M



Recommended Products

Copyright ©2010 OCRE COMMUNICATION LIMITED. All rights reserved