OCRECOM's XFP transceiver is a high performance, cost effective module for serial optical data communications applications specified for signal rates of 9.95 Gb/s to 11.3 Gb/s. It is fully compliant to XFP MSA Rev 4.5. The modules are designed for single mode fiber and operates at a nominal wavelength of 1550 nm, XFP ZR. The transmitter section incorporates EML cooled laser 1550nm. The receiver section uses APD high sensetivity receiver.
see details
OCRECOM’s XFP transceiver is a high performance, cost effective modules for series optical data communications applications specified for signal rates of 9.95 Gb/s to 11.3 Gb/s. It is fully compliant to XFP MSA Rev 4.5. The modules are designed for single mode fiber and operates at a nominal wavelength of 1550nm, XFP ER. The transmitter section incorporates uncooled directly modulated 1550nm EML DFB Laser. The receiver section uses PIN photo detector for low dark current and excellent responsivity.
see details
OCRECOM’s XFP transceiver is a high performance, cost effective modules for series optical data communications applications specified for signal rates of 9.95 Gb/s to 11.3 Gb/s. It is fully compliant to XFP MSA Rev 4.5. The modules are designed for single mode fiber and operates at a nominal wavelength of 1310nm, XFP LR. The transmitter section incorporates uncooled directly modulated 1310nm DFB Laser. The receiver section uses PIN photo detector for low dark current and excellent responsivity.
see details
OCRECOM’s XFP transceiver is a high performance, cost effective modules for series optical data communications applications specified for signal rates of 9.95 Gb/s to 11.3 Gb/s. It is fully compliant to XFP MSA Rev 4.5. The modules are designed for single mode fiber and operates at a nominal wavelength of 850nm, XFP SR. The transmitter section incorporates uncooled directly modulated 850nm VCSEL Laser. The receiver section uses PIN photo detector for low dark current and excellent responsivity.
see details
OCRECOM’s CWDM XFP optical transceivers are designed for Storage, IP network and LAN. The CWDM XFP is a fully integrated 8G~10Gbps~11.1 optical transceiver module. The CWDM XFP is a hot pluggable module in the Z-direction that is mainly usable in typical router/switches line card applications. In addition, they comply with the XFP Multi Sourcing Agreement (MSA). This transceiver uses a cooled CWDM EML Laser Diode to achieve 80km over standard single mode fiber. Some models are using 10G CWDM DFP laser. The most commonly used CWDM XFP wavelengths are from 1270nm to 1610nm with steps of 20nm. The transmission distance depends on the wavelength, the fiber type and the MUX/DEMUX insertion loss. The transmitter section uses a multiple quantum well laser. The receiver section uses an integrated InGaAs detector or APD receiver. CWDM XFP module can reach up to 80km.
see details
OCRECOM’s DWDM XFP transceivers are available in channels defined in the ITU Grid (100 GHz spacing), from Channel 19 to Channel 61, or ITU Grid (50Ghz spacing), from channel 200 to 592ch. OCRECOM currently offers DWDM XFP optics for 10G networking at ranges between 40km, 80km. DWDM stands for Dense Wavelength-Division Multiplexing. It is a technology which multiplexes a number of different “colored” optical signals together. These systems are popular with telecommunications companies because they allow them to expand the capacity of the network without laying more fiber. More recently, smaller ISP’s have been using this equipment as well; they will rent or buy “dark fiber” and by utilizing DWDM they can put more traffic over the same line. OCRECOM has industry fastest lead time on DWDM 10G transceivers in different for factors.
see detailsTel :
+86-755-23353855
E-mail :
sales@ocrecom.com
#D325, Xixiang Avenue 288, Baoan Dist., Shenzhen, 518102. China
Scan QR code
